The Chopper Compendium

Thanks Friend!

Welded the tunnel fully inside and out. Tacked the outer shell on. It is ready to do the closing welds.

The bike is at the speed shop. Working on fitting the oil cooling and brake lines in AN fittings.

http://i86.photobucket.com/albums/k92/jbfrmca/jbfrmca036/038_zpsughqlohk.jpg The rockers look good to me. The spring rates is about the only thing t cure this. One thing I wonder about thou is with the new tabs on the outside of those rockers if they are side loading not transfering the energy stra...

Thanks David!

Made a bracket, new bushing, and knob for the idle adjuster.

Sorry Friend! Got the filters done. Welded 8 pieces together and put on rotary table. Milled the centers out and drilled for 6 bolt holes. http://i.imgur.com/7ylHjoql.jpg http://i.imgur.com/4iFEDckl.jpg Milled the outer size. http://i.imgur.com/Jf6XBLFl.jpg http://i.imgur.com/6oJSv2hl.jpg Cleaned up...

Making some pod filters. Removed the rubbers from the stock air box. http://i.imgur.com/sD3Cynkl.jpg http://i.imgur.com/tkgJeZ8l.jpg They fit perfect in a 3 in exhaust pie with a swedge. http://i.imgur.com/A5Hbadel.jpg http://i.imgur.com/kLDpr6Zl.jpg Made a brace and cut 4 pieces the same. http://i....

that is what I get on my chops in distance 75 miles 1.75 gallon tanks.
You are riding a hardtail breaks are not bad?
I like pulling in gas station also and you will too see the heads turn and people looking at your chop. She will be a real head turner!

Got the other grip done. Was asked in a couple places about the process so, took full picture set this grip. The throttle reuse the stock plastic liner pressed or glued in and the clutch side set screw. 1. Take solid stock of large enough size and drill and turn to largest diameter. http://i.imgur.c...

One handlebar grip done one to go.. http://i.imgur.com/v2cO0Ihl.jpg http://i.imgur.com/flMNoSYl.jpg http://i.imgur.com/PDPUkErl.jpg http://i.imgur.com/oQiNWdyl.jpg http://i.imgur.com/K7xtWh7l.jpg http://i.imgur.com/f22pTxml.jpg http://i.imgur.com/RsQXFCbl.jpg http://i.imgur.com/irVMPQXl.jpg

Got the brake light switch mount made.

Thanks Guys! IRS fronts are known to sometimes flex the rockers with the suspensions independant from each other so, the heim joints were needed I thought so not to fight that action if it happens. Modified the coil mounts and hid the horn under the tank. http://i.imgur.com/ybQlSZGl.jpg http://i.img...

Front brake stay bars.

I have brazed everything but aluminum?

Very interested on how it works!

Think I would find a tig welder AC and just do it that way if at all possible?

It is GOOD to see you here man! These guys know more than me. If you need real knowledge the right people are here. There will be no bullshit here either. Pictures of what you are doing maybe start a thread on it will help. Imgur.com is what I use for image hosting. Just click on large after uploadi...

Rear tank mount is done.