The Chopper Compendium

Trying to search for some cool scenic mountain stencils of all kinds of nice scenic pictures, anyone have any great sites for them.

Thanks Krymis, going to purchase some air brush books on how to use and paint.

Hey guys and gals, I just purchased my first air brush kit from ebay today. Anyone done any airbrushing, any cool tips to share when learning. I will post a pic when it arrives.

Hey guys and gals, used heavy duty pallet to mount my jd2 bender on. Should work good since the bender is now air hydraulic, less stress on mounts when bending.

I purchased some square tubing 4ft long 2by2 and metal plate, making the jd2 bender solid mounting. I have some heavy duty pallets that I am considering mounting it on.

More progress, finished drilling plates for mounting the ram. Need to do some fabrication of one plate to get it ready to weld up to the mounting bracket on ram, thick plate so need to bevel for real good solid penetration. :D Once that's all done then figure out best way to mount bender on table or...

Cool man, looking great nice work, Daughter seems to love the bike also

I am ordering two new tires with rims from ebay, Then get more welder cart finally rolling on some big tires. Made handle on front long tube with side handle to pull out around yard.

Progress today, got 4 wheel mounts fabricated and two welded on frame so far. Have to buy two rims for other tires before mounting them on frame, then finish painting lower frame.

Hey guys and gals, finishing drilling one hole in plate for front ram mounting. Then other plate needs to get bevelled for welding on to the big mounting bracket, plate is 1/4 inch thick to weld. My eastwood 135 amp mig should work just great.

Hello Railroad bob, hope all is well with your projects. Got working on welder cart build today, finished fabing and welding up the whole frame. Got three coats primer and two coats blue so far, Fabing up wheel mounting brackets 4 of them to weld on frame, then make some holders and shelving stuff.

More progress, got chopper frame all welded up and welds smoothed out. 3 coats primer and just put on second coat of blue, two or three more blue coats to go.

Yes was planning to weld it to lower tree, good idea or bad. I will grind it down to steel area on shaft for welding if possible.

Took apart steering stem from stock Honda neck, using it for springer build.

Hey guys and gals, been doing mockup of springer front end build.