tattoo idea

The general bullshit and chatty section where we post general gossip.
User avatar
Neo Dutch
NewB
Posts: 29
Joined: Mon Nov 07, 2011 6:30 pm
SELF INTRODUCTION: Intereseted in all thing motorcycling, particularly modifications folk do to their bikes. Admire quality design and workmanship. Not so keen on bolt-on parts, but they have their place in the world. Not everyone can be a master machinist, welder or spray painter, but that won't stop me from trying. Great admirer of master engravers and have been working hard for several years to improve my skills in this most difficult of crafts. Also enjoy pin striping, and am fairly good at it.
Favourite food is Spam. Here's some good recipes www.pinheadlounge.com/neodutch . Kill Flanders.
Location: Oz
Contact:

Re: tattoo idea

Post by Neo Dutch »

Here's a pic of some nice technical work. Tattoo based on a photo lifted from the net and the photogapher and the guy in the original photo both think it's a bit creepy.

Image
The tell tale tickle of ashphalt on the sagging underbelly of my lowered expectations.
Dan.in.Can
Tourist
Posts: 30
Joined: Thu Jan 19, 2012 8:53 pm
SELF INTRODUCTION: My name is Dan, i'm 28 years old and i live in Ontario Canada. i grew up in an old school house that my dad fixed up out in the country, just outside a very small town called Hillsdale. i spent most of my childhood working at the farm up the road, so i guess you could say im a country boy. school and me never quite saw eye to eye, not that i wasn't smart enough, but i had a big issue with authority, so i ended up dropping out of highschool to start working in construction. spent about 6 years as a general contractor, but most of the work was in Toronto and i got tired of commuting. now i'm a heavy equipment operator, i spend my summers diggin holes, and my winters plowing snow. i do everything from floating equipment and driving truck, to digging basements and installing septics. I also do quite a bit of maintinence and repairs on our trucks and equipment. thats where i learned to weld (mig & stick) as well as basic mechanical and fabrication skills. i've been with this company for 6 years now. i've been married 7 years now, and we have 2 boys 10 and 12 yrs old. i spend as much of my spare time out on the bike as possible. im riding a F model VTX1800, i try to get away on at least one long trip every year. last couple years me and the guys have rode to north carolina, i love those mountain roads. I've allways dreamed of building a bike, but never thought it was actually a possibility untill i found the CBH website. i read through the OSC build and it completely blew me away, i then read through every article on the site and now i'm a huge fan. everything from the attitude and idea, to the work thats done is fantastic. i'm starting my first bike build real soon, ive got my bender die ordered from jd2 and i've started building the CBH bender. even just skimming through this message board provides more usefull tech knowlege about choppers than the entire web. now im chasing a dream, thanks CBH.
Location: Ontario, Canada

Re: tattoo idea

Post by Dan.in.Can »

Neo Dutch wrote:Yes it was done in one sitting.

This tattoo is not "too big", it's exactly the size that the wearer (George the Painter) wanted it.

i bet the gun was feeling like a blowtorch by the time he was done, i had 4 hrs on my inner arm, it was brutal.
if you have two or three wheels and a smile on your face then its all good
Dan.in.Can
Tourist
Posts: 30
Joined: Thu Jan 19, 2012 8:53 pm
SELF INTRODUCTION: My name is Dan, i'm 28 years old and i live in Ontario Canada. i grew up in an old school house that my dad fixed up out in the country, just outside a very small town called Hillsdale. i spent most of my childhood working at the farm up the road, so i guess you could say im a country boy. school and me never quite saw eye to eye, not that i wasn't smart enough, but i had a big issue with authority, so i ended up dropping out of highschool to start working in construction. spent about 6 years as a general contractor, but most of the work was in Toronto and i got tired of commuting. now i'm a heavy equipment operator, i spend my summers diggin holes, and my winters plowing snow. i do everything from floating equipment and driving truck, to digging basements and installing septics. I also do quite a bit of maintinence and repairs on our trucks and equipment. thats where i learned to weld (mig & stick) as well as basic mechanical and fabrication skills. i've been with this company for 6 years now. i've been married 7 years now, and we have 2 boys 10 and 12 yrs old. i spend as much of my spare time out on the bike as possible. im riding a F model VTX1800, i try to get away on at least one long trip every year. last couple years me and the guys have rode to north carolina, i love those mountain roads. I've allways dreamed of building a bike, but never thought it was actually a possibility untill i found the CBH website. i read through the OSC build and it completely blew me away, i then read through every article on the site and now i'm a huge fan. everything from the attitude and idea, to the work thats done is fantastic. i'm starting my first bike build real soon, ive got my bender die ordered from jd2 and i've started building the CBH bender. even just skimming through this message board provides more usefull tech knowlege about choppers than the entire web. now im chasing a dream, thanks CBH.
Location: Ontario, Canada

Re: tattoo idea

Post by Dan.in.Can »

Neo Dutch wrote:Here's a pic of some nice technical work. Tattoo based on a photo lifted from the net and the photogapher and the guy in the original photo both think it's a bit creepy.

thats f'n awesome. is that Richie Pan as well? i don't think i saw it on his site.
if you have two or three wheels and a smile on your face then its all good
User avatar
Neo Dutch
NewB
Posts: 29
Joined: Mon Nov 07, 2011 6:30 pm
SELF INTRODUCTION: Intereseted in all thing motorcycling, particularly modifications folk do to their bikes. Admire quality design and workmanship. Not so keen on bolt-on parts, but they have their place in the world. Not everyone can be a master machinist, welder or spray painter, but that won't stop me from trying. Great admirer of master engravers and have been working hard for several years to improve my skills in this most difficult of crafts. Also enjoy pin striping, and am fairly good at it.
Favourite food is Spam. Here's some good recipes www.pinheadlounge.com/neodutch . Kill Flanders.
Location: Oz
Contact:

Re: tattoo idea

Post by Neo Dutch »

Nope. He's from Italy.
The tell tale tickle of ashphalt on the sagging underbelly of my lowered expectations.
Post Reply

Return to “The Bull Pen”