P-clamps .....
-
yona
- Conventioneer
- Posts: 278
- Joined: Tue Oct 25, 2011 4:55 pm
- SELF INTRODUCTION: Automotive weldor and fabricator for 45 years, like to dip in to both pools............make hand-tooled leather covered seats and bags.................jack of all trades........................63 years old......live in Baja Georgia, on the coast...former military
- Location: Baja Georgia - St Johns River Inlet
- Contact:
P-clamps .....
Any body up for this..... I need 4 P-clamps made to mount a freebie RK wind shield to my FXR 39 mm Narrow-glide front end. I can rough them out , but I need the 39mm hole bored and the clamps split and drilled and tapped for allen head bolts. Anyone interested and at what price. I have the material ..... 3/4" 6061 plate ... ????
I.D.G.A.F.H.T.D.I.A.O.C.C.
-
yona
- Conventioneer
- Posts: 278
- Joined: Tue Oct 25, 2011 4:55 pm
- SELF INTRODUCTION: Automotive weldor and fabricator for 45 years, like to dip in to both pools............make hand-tooled leather covered seats and bags.................jack of all trades........................63 years old......live in Baja Georgia, on the coast...former military
- Location: Baja Georgia - St Johns River Inlet
- Contact:
-
Customize IT
- Contributor
- Posts: 992
- Joined: Thu Sep 19, 2013 7:54 am
- SELF INTRODUCTION: I am a young punk kid that needs some help building himself a chopper!!
I am sorry I only have a hotmail account???
Tell me what I need to do I need help with my girder!!!
PLESE HELP????
[url=http://imgur.com/8saXkqN][img]http://i.imgur.com/8saXkqNl.jpg[/img][/url]
[url=http://imgur.com/pXJZqQ0][img]http://i.imgur.com/pXJZqQ0l.jpg[/img][/url]
[url=http://imgur.com/T3Q4Ev4][img]http://i.imgur.com/T3Q4Ev4l.jpg[/img][/url]
[url=http://imgur.com/fsXGYQw][img]http://i.imgur.com/fsXGYQwl.jpg[/img][/url] - Location: Ohio, USA
Re: P-clamps .....
Got a print?
-
yona
- Conventioneer
- Posts: 278
- Joined: Tue Oct 25, 2011 4:55 pm
- SELF INTRODUCTION: Automotive weldor and fabricator for 45 years, like to dip in to both pools............make hand-tooled leather covered seats and bags.................jack of all trades........................63 years old......live in Baja Georgia, on the coast...former military
- Location: Baja Georgia - St Johns River Inlet
- Contact:
Re: P-clamps .....
No ....... but they will be shaped like a "P", 39 mm holes, split and drilled and tapped to fit to 39mm legs. The leg part will stick out to the side and be drilled and tapped for button-head hex machine screws. I can draw up something. To keep them from being so bulky, 1/4-20 or smaller, for the clamp part and maybe 5/16 to hold the shield on..... Brackets are quick-disconnect, but will drill and mount.
- P-clamp.jpg (150.29 KiB) Viewed 3614 times
I.D.G.A.F.H.T.D.I.A.O.C.C.
-
yona
- Conventioneer
- Posts: 278
- Joined: Tue Oct 25, 2011 4:55 pm
- SELF INTRODUCTION: Automotive weldor and fabricator for 45 years, like to dip in to both pools............make hand-tooled leather covered seats and bags.................jack of all trades........................63 years old......live in Baja Georgia, on the coast...former military
- Location: Baja Georgia - St Johns River Inlet
- Contact:
Re: P-clamps .....
The inside corners should be trimmed to keep them from hitting tank or light .... like a connecting rod end or a little recessed.
I.D.G.A.F.H.T.D.I.A.O.C.C.
-
Customize IT
- Contributor
- Posts: 992
- Joined: Thu Sep 19, 2013 7:54 am
- SELF INTRODUCTION: I am a young punk kid that needs some help building himself a chopper!!
I am sorry I only have a hotmail account???
Tell me what I need to do I need help with my girder!!!
PLESE HELP????
[url=http://imgur.com/8saXkqN][img]http://i.imgur.com/8saXkqNl.jpg[/img][/url]
[url=http://imgur.com/pXJZqQ0][img]http://i.imgur.com/pXJZqQ0l.jpg[/img][/url]
[url=http://imgur.com/T3Q4Ev4][img]http://i.imgur.com/T3Q4Ev4l.jpg[/img][/url]
[url=http://imgur.com/fsXGYQw][img]http://i.imgur.com/fsXGYQwl.jpg[/img][/url] - Location: Ohio, USA
Re: P-clamps .....
Be nice to have specs on it?
Width, length, hole spacing and such?
Width, length, hole spacing and such?
-
yona
- Conventioneer
- Posts: 278
- Joined: Tue Oct 25, 2011 4:55 pm
- SELF INTRODUCTION: Automotive weldor and fabricator for 45 years, like to dip in to both pools............make hand-tooled leather covered seats and bags.................jack of all trades........................63 years old......live in Baja Georgia, on the coast...former military
- Location: Baja Georgia - St Johns River Inlet
- Contact:
-
yona
- Conventioneer
- Posts: 278
- Joined: Tue Oct 25, 2011 4:55 pm
- SELF INTRODUCTION: Automotive weldor and fabricator for 45 years, like to dip in to both pools............make hand-tooled leather covered seats and bags.................jack of all trades........................63 years old......live in Baja Georgia, on the coast...former military
- Location: Baja Georgia - St Johns River Inlet
- Contact:
Re: P-clamps .....
In adding specs, I realized that this was more involved than it needs to be ..... thanks anyway.... bought this http://www.ebay.com/itm/Carbide-Tip-Met ... 0791782205
and will cut plate with carbide saw and drill and tap , cut cap and then use cutters to make cut for radius.... might not be pretty but painted black they will work ; )
Have a piece of 6 x 12".... If I flop the pattern, I can get 2 out of a 4"x6" piece ...
and will cut plate with carbide saw and drill and tap , cut cap and then use cutters to make cut for radius.... might not be pretty but painted black they will work ; )
Have a piece of 6 x 12".... If I flop the pattern, I can get 2 out of a 4"x6" piece ...
I.D.G.A.F.H.T.D.I.A.O.C.C.
-
Customize IT
- Contributor
- Posts: 992
- Joined: Thu Sep 19, 2013 7:54 am
- SELF INTRODUCTION: I am a young punk kid that needs some help building himself a chopper!!
I am sorry I only have a hotmail account???
Tell me what I need to do I need help with my girder!!!
PLESE HELP????
[url=http://imgur.com/8saXkqN][img]http://i.imgur.com/8saXkqNl.jpg[/img][/url]
[url=http://imgur.com/pXJZqQ0][img]http://i.imgur.com/pXJZqQ0l.jpg[/img][/url]
[url=http://imgur.com/T3Q4Ev4][img]http://i.imgur.com/T3Q4Ev4l.jpg[/img][/url]
[url=http://imgur.com/fsXGYQw][img]http://i.imgur.com/fsXGYQwl.jpg[/img][/url] - Location: Ohio, USA
Re: P-clamps .....
If change your mind make a napkin sectch!
-
yona
- Conventioneer
- Posts: 278
- Joined: Tue Oct 25, 2011 4:55 pm
- SELF INTRODUCTION: Automotive weldor and fabricator for 45 years, like to dip in to both pools............make hand-tooled leather covered seats and bags.................jack of all trades........................63 years old......live in Baja Georgia, on the coast...former military
- Location: Baja Georgia - St Johns River Inlet
- Contact:
Re: P-clamps .....
yona wrote:No ....... but they will be shaped like a "P", 39 mm holes, split and drilled and tapped to fit to 39mm legs. The leg part will stick out to the side and be drilled and tapped for button-head hex machine screws. I can draw up something. To keep them from being so bulky, 1/4-20 or smaller, for the clamp part and maybe 5/16 to hold the shield on..... Brackets are quick-disconnect, but will drill and mount.
That's what this is ... ^^^ ..... ; )
I.D.G.A.F.H.T.D.I.A.O.C.C.
-
Maxthegardener
- Builder
- Posts: 384
- Joined: Tue Oct 25, 2011 11:28 am
- SELF INTRODUCTION: Name is Max living in scotland ,and building my first bike, Which is derived from a buellM2 Cyclone..Started with an engine and a Drop seat frame wich was made to my spec by a more experienced builder. would like to learn more about the skills and techniques required to build a frame so I value being a member here...Cheers Max
- Location: Angus, Scotland
Re: P-clamps .....
Nice find ....that hole saw..
-
yona
- Conventioneer
- Posts: 278
- Joined: Tue Oct 25, 2011 4:55 pm
- SELF INTRODUCTION: Automotive weldor and fabricator for 45 years, like to dip in to both pools............make hand-tooled leather covered seats and bags.................jack of all trades........................63 years old......live in Baja Georgia, on the coast...former military
- Location: Baja Georgia - St Johns River Inlet
- Contact:
Re: P-clamps .....
Well, that's out , unless you want to send me a free one ..... was in the UK !! Found a 40mm and will use aluminum tape for ac ducts to shim... It is just to mount a windshield.
I.D.G.A.F.H.T.D.I.A.O.C.C.
-
railroad bob
- Contributor
- Posts: 939
- Joined: Fri Nov 04, 2011 10:07 pm
- SELF INTRODUCTION: Hi Dan, thanks for your time and energy spent on this new board. I hope you will give me a waiver on the email account, I have used gmail so long I don't have a clue what my service provider account is.
I just returned home from a 2 week trip in New Mexico, have a few good pix, can't wait to share my off-highway traveling. Got to put 1400 miles on the scoot.
Best, Bob Davidson - Location: Alaska
Re: P-clamps .....
free shippingyona wrote:bought this http://www.ebay.com/itm/Carbide-Tip-Met ... 0791782205
Alaska - Land of the Individual and Other Endangered Species
An Armed Society is a Polite Society,...
Politicians Prefer Unarmed Peasants
TANSTAAFL
An Armed Society is a Polite Society,...
Politicians Prefer Unarmed Peasants
TANSTAAFL
-
yona
- Conventioneer
- Posts: 278
- Joined: Tue Oct 25, 2011 4:55 pm
- SELF INTRODUCTION: Automotive weldor and fabricator for 45 years, like to dip in to both pools............make hand-tooled leather covered seats and bags.................jack of all trades........................63 years old......live in Baja Georgia, on the coast...former military
- Location: Baja Georgia - St Johns River Inlet
- Contact:
Re: P-clamps .....
I was wrong ,,,,, Yeah, it happens ... ; ) Was in Hongkong and he showed me the 39mm and It will be here in a couple of weeks.... I will layout , cut the caps and drill and tap holes and center a guide hole. Drill press vise will hold 2 at a time. Cut final P shape after all other work is done, leaving 1/2 " thickness for the area that wraps around fork leg.
I.D.G.A.F.H.T.D.I.A.O.C.C.
-
rudog
- Conventioneer
- Posts: 257
- Joined: Tue Oct 25, 2011 2:03 pm
- SELF INTRODUCTION: Jack of all. Master of none. Worked in a machine shop since I was 8. Desgined embedded computers for a few years. Done lots in between. If there's anything I've learned with certainty, "Anyone who looks like they know what they're doing is putting on an act."
- Location: Texoma
Re: P-clamps .....
Assemble the clamps using a washer to seperate the halves. Drill as close as you can...then file to suite. You can scribe a mark to file to and hold in a vice to help keep it square. When you get close, clamp in place and slide the clamp over the surface to find the high spots. Use a bearing scraper to take off the high spots.
I've done dozens of bearings this way and hated every scrape of it, but it works.
I've done dozens of bearings this way and hated every scrape of it, but it works.