The Chopper Compendium

Heya! Building an early amen savior chop.. probably in weird territory but was happy to find the chopper builders handbook! Had to make a stem as the neck was setup for 1" Harley and the upper and lower triple tree is 7/8.. got that figured out and going in tomorrow then messing with fabricating lower rockers.. perplexed a bit there.. Have a 40 degree neck with frame level, presume a 50 degree line to infinity off the back pivot point then square the centerline of the 21" wheel?

Hello.

Check " Springers, Girders, Spirders and Leafers" on this forum, and read "rocker angle" by Shovelhead Dan.

Slow here right now, be patient.

welcome to the forum!

sometimes it gets so quiet in here you can hear the grass grow, but it always picks back up. if you still don't have your rocker geometry figured out after you read the thread hansgoudzwaard pointed you to, let us know what's stumping you and we'll help you get it figured out.

and be sure to post pics as ya go, we love pics.

take care,
-dan