jig pics

Post info here on welding jigs and fixtures.
User avatar
rudog
Conventioneer
Posts: 257
Joined: Tue Oct 25, 2011 2:03 pm
SELF INTRODUCTION: Jack of all. Master of none. Worked in a machine shop since I was 8. Desgined embedded computers for a few years. Done lots in between. If there's anything I've learned with certainty, "Anyone who looks like they know what they're doing is putting on an act."
Location: Texoma

Re: jig pics

Post by rudog »

Thanx JB for waking this thread again. I am still so lovin' it.
hansgoudzwaard
Contributor
Posts: 804
Joined: Wed Oct 26, 2011 10:43 pm
SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.

Re: jig pics

Post by hansgoudzwaard »

jiggiee1
jiggiee1
jig1.JPG (24.19 KiB) Viewed 4163 times
jiggieee2
jiggieee2
jig2.JPG (47.21 KiB) Viewed 4163 times
inches
inches
jigsidevw.JPG (24.49 KiB) Viewed 4145 times
Post Reply

Return to “Jig and Fixture Building”