aluminum tank question

This section is for all posts concerning sheet metal fabrication
Post Reply
Russ
Tourist
Posts: 46
Joined: Sat Nov 26, 2011 3:46 am
SELF INTRODUCTION: I an indepent biker, no offence to patch holders but I can't be bothered with all that tough guy stuff. I'm into old BMW boxers. Low budget builder. I like my family, my bike and not much else. My current project is an r100rs Beemer that was posted on the old chopperhandbook site under the title "Another BMW gets attacked with a hacksaw".

aluminum tank question

Post by Russ »

I'm thinking of making a prism tank out of aluminum. Does anyone know what thickness metal I should be using? Any help appriciated.
hansgoudzwaard
Contributor
Posts: 804
Joined: Wed Oct 26, 2011 10:43 pm
SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.

Re: aluminum tank question

Post by hansgoudzwaard »

I have not built one , but you should be able to find it in this link.

http://www.fournierenterprises.com/MetalQA.html#1
Russ
Tourist
Posts: 46
Joined: Sat Nov 26, 2011 3:46 am
SELF INTRODUCTION: I an indepent biker, no offence to patch holders but I can't be bothered with all that tough guy stuff. I'm into old BMW boxers. Low budget builder. I like my family, my bike and not much else. My current project is an r100rs Beemer that was posted on the old chopperhandbook site under the title "Another BMW gets attacked with a hacksaw".

Re: aluminum tank question

Post by Russ »

Good link. Thank you.
Jeff L
Contributor
Posts: 687
Joined: Fri Oct 28, 2011 5:09 pm
SELF INTRODUCTION: Hey...I live in South Jersey (the Super Fund State) work as an Operating Engineer local825.Besides bikes I love to fish the surf.I have my current & seemingly endless project a BSA 750 Rocket3, a 72 Honda CB750,79 Kawasaki KZ1000, 48 Simplex, & a 62 Norton Atlas engine
Location: South Jersey

Re: aluminum tank question

Post by Jeff L »

If it were me...I probably wouldnt be comfortable with much less than 1/8".It would be easier to weld on the petcock bungs Filler neck & mounting tabs.
Changing the shape of the Earth...1 bucket at a time...IUOE local 825 top of the food chain
Post Reply

Return to “Sheet Metal Work”