Baking Rattle Can Paint

Use this area for posts concerning preparation, painting, finishing, airbrushing, pinstriping and the like.
Jeff L
Contributor
Posts: 539
Joined: Fri Oct 28, 2011 5:09 pm
SELF INTRODUCTION: Hey...I live in South Jersey (the Super Fund State) work as an Operating Engineer local825.Besides bikes I love to fish the surf.I have my current & seemingly endless project a BSA 750 Rocket3, a 72 Honda CB750,79 Kawasaki KZ1000, 48 Simplex, & a 62 Norton Atlas engine
Location: South Jersey

Baking Rattle Can Paint

Postby Jeff L » Mon Sep 01, 2014 3:44 pm

To cure it.Anybody ever do this?How would it effect filler under the Paint?
Changing the shape of the Earth...1 bucket at a time...IUOE local 825 top of the food chain

hansgoudzwaard
Contributor
Posts: 755
Joined: Wed Oct 26, 2011 10:43 pm
SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.

Re: Baking Rattle Can Paint

Postby hansgoudzwaard » Mon Sep 01, 2014 11:55 pm

I have never done it. I would think you could bake it at a lower heat setting if it was engine paint, disc brake paint, etc.

hansgoudzwaard
Contributor
Posts: 755
Joined: Wed Oct 26, 2011 10:43 pm
SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.

Re: Baking Rattle Can Paint

Postby hansgoudzwaard » Tue Sep 02, 2014 10:05 am


Jeff L
Contributor
Posts: 539
Joined: Fri Oct 28, 2011 5:09 pm
SELF INTRODUCTION: Hey...I live in South Jersey (the Super Fund State) work as an Operating Engineer local825.Besides bikes I love to fish the surf.I have my current & seemingly endless project a BSA 750 Rocket3, a 72 Honda CB750,79 Kawasaki KZ1000, 48 Simplex, & a 62 Norton Atlas engine
Location: South Jersey

Re: Baking Rattle Can Paint

Postby Jeff L » Tue Sep 02, 2014 12:14 pm

I was talking about regular ol Rattle Can Paint.Also wondering if heàting would do damage to Body work under the Paint.
Changing the shape of the Earth...1 bucket at a time...IUOE local 825 top of the food chain

User avatar
curt
Contributor
Posts: 907
Joined: Tue Oct 25, 2011 11:36 am
SELF INTRODUCTION: hi everyone its me from the old bord hopeing to see everyone come here and all the newcomers . lets make this as good as the old one or even better . lookin foreward to seeing everyones projects continue and ill be continueing mine too
Location: utica new york

Re: Baking Rattle Can Paint

Postby curt » Tue Sep 02, 2014 5:33 pm

I have never done it but would think you could spray paint is just a lot extra hardner in it as for underneath probly temp is your only limiting factor most spraybooths now days have heat to bake paint
ever notice when you hit somethin or someone with a hammer you feel instantly better

saex
NewB
Posts: 9
Joined: Tue Nov 24, 2015 2:22 pm
SELF INTRODUCTION: I've been building choppers and trikes for around 15yrs now the chopper builders site is like a bible to me, i spend what free time i can get hunting around for parts to add to my collection. I'am a big fan of old school choppers i build mine loud and low with 20" high bars and high sissy bars.
Location: Newcastle upon Tyne

Re: Baking Rattle Can Paint

Postby saex » Sun Feb 12, 2017 7:26 am

I've done this a number of times on small job's, If it will fit in the big oven i have (The wife is ok with it.hahaha) with great results it will not have any affect on the filler i keep the temp around 100 degrees for 45mins then let cool in the oven.


Return to “Prep, Painting and Finishing”

Who is online

Users browsing this forum: No registered users and 1 guest