Page 1 of 2
radius tool
Posted: Sun Jan 22, 2012 8:31 pm
by curt
anyone got plans for a radius tool for the lathe or mabey a couple good pics
Re: radius tool
Posted: Mon Jan 23, 2012 12:29 am
by triker_chewie
Re: radius tool
Posted: Mon Jan 23, 2012 3:36 pm
by Maz
I can probably find you some pics of my radius tool if that helps dude
Maz xx
Re: radius tool
Posted: Mon Jan 23, 2012 4:40 pm
by jimmib
Here's one on C/W that Mechworks posted. Quite a few pics and a drawing or two.
http://chopperweb.info/forum/showthread ... eadid=8763
Re: radius tool
Posted: Mon Jan 23, 2012 6:53 pm
by curt
thanks maz id definatly like to see em and thankks guys i want to see em all pick an easyone to build that will work with my existing carbide bits
Re: radius tool
Posted: Mon Jan 23, 2012 8:03 pm
by msn1977
Very neat little toolpost ball turner.
http://www.projectsinmetal.com/free-met ... athe-mill/ Several other projects on this site.
Re: radius tool
Posted: Tue Jan 24, 2012 9:17 pm
by joechop
Wasn't able to view MechWerks but here are a couple others. I had the dimensions of the OMW and was going to make it a couple years ago - who knows where the hell they are now becasue I can't find...
http://lepton.com/metal/ball_turner.html
http://www.frets.com/homeshoptech/TechL ... adius.html
http://littlemachineshop.com/Instructio ... ctions.pdf
Re: radius tool
Posted: Sat Jan 28, 2012 1:39 pm
by BIGJIM
Posted theses on the old board.
Re: radius tool
Posted: Sat Jan 28, 2012 2:04 pm
by jimmib
Now, that one is about as simple as you can get.....Thanks Jim!
Re: radius tool
Posted: Sat Jan 28, 2012 4:26 pm
by yona
Some of this might be what Jim posted....just put up all that I had plucked from the internet...
Re: radius tool
Posted: Sat Jan 28, 2012 4:29 pm
by yona
Instructions and picture
Re: radius tool
Posted: Sat Jan 28, 2012 4:34 pm
by yona
I went back and took out what Jim had posted... ; )
Re: radius tool
Posted: Sun Jan 29, 2012 8:20 am
by Maz
There's some pics of my large radius tool in the Machine Shop section but it is very similar to the one above, just larger and more adjustable.....
Maz xx
Re: radius tool
Posted: Sun Jan 29, 2012 11:32 am
by gearhead1951
Re: radius tool
Posted: Sun Jan 29, 2012 12:07 pm
by Maz