foundry burner

Use this area for posts and questions that don't seem to fit anywhere else.
Post Reply
User avatar
sleepyonthree
Stalker
Posts: 140
Joined: Tue Oct 25, 2011 11:10 am
SELF INTRODUCTION: All around tinkerer. Hotrods, cycles, trikes, gardening, cooking, women. Originally joined CBH Jan 29, 2006. Way to many projects, but, thats the fun. Live out in the boonies, less complaints from conformist neighbors.
Location: G,ville Florida

foundry burner

Post by sleepyonthree »

For anyone thinking of doing some casting, here's couple of links to Ron Riel's site
with info for building a furnace burner.

http://ronreil.abana.org/design1.shtml

http://ronreil.abana.org/design2.shtml
nothing is foolproof to a sufficiently talented fool
gearhead1951
Builder
Posts: 367
Joined: Wed Oct 26, 2011 4:49 am
SELF INTRODUCTION: I am an expat tennessee hillbilly and retired us navy engineer livin' in Scotland and I have a love of old cars , trucks, motorcycles and most any other machinery !

I dont know if I can think of enough to say to reach the two hundred charactor minimun set by the mods , but I will persevere
Location: Greenock Scotland

Re: foundry burner

Post by gearhead1951 »

And www.alloyavenue.com is another good one ! It is a spinoff from www.backyardmetalcasing.com !
buellfun
Tourist
Posts: 31
Joined: Fri Nov 11, 2011 9:03 am
SELF INTRODUCTION: I live in colorado. I have 5 boys. been married 20 years. just got my bike running. I am a sparky by trade. I am really glad to find the guys and gals from the old site. Looking forward to see the site grow and produce nice quality bike through the free infomation found on the board.

Re: foundry burner

Post by buellfun »

Back yard metal casting is where i started. there burner works great.
Chris
hansgoudzwaard
Contributor
Posts: 804
Joined: Wed Oct 26, 2011 10:43 pm
SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.

Re: foundry burner

Post by hansgoudzwaard »

Is anyone here experienced in lost wax casting? I want to replicate a few objects for chopper use. I have never done any casting of any sort.
gearhead1951
Builder
Posts: 367
Joined: Wed Oct 26, 2011 4:49 am
SELF INTRODUCTION: I am an expat tennessee hillbilly and retired us navy engineer livin' in Scotland and I have a love of old cars , trucks, motorcycles and most any other machinery !

I dont know if I can think of enough to say to reach the two hundred charactor minimun set by the mods , but I will persevere
Location: Greenock Scotland

Re: foundry burner

Post by gearhead1951 »

gearhead1951 wrote:And http://www.alloyavenue.com is another good one ! It is a spinoff from http://www.backyardmetalcasing.com !
All the info you need is on these sites!
TattooLeeRoy
Lurker
Posts: 74
Joined: Thu Aug 09, 2012 12:59 am
SELF INTRODUCTION: Hi. I am LeeRoy, been biking for 30 yrs now. I ride an ironhead sportster, and (since I have a rider) am wanting to start a ground up build. I am really happy I found CBH, and want to thank you for info it contains. I look forward to the sportster hardtail article, and hope for a girder article
Location: San Antonio, TX
Contact:

Re: foundry burner

Post by TattooLeeRoy »

Excellent! Thanks, I needed that.
We can do anything, impossible just takes longer.
Post Reply

Return to “General Technical Matters”