Page 1 of 2
Sealing up ShovelHead pushrod Tubes,,,,,,,,,,,,,,made simple
Posted: Sat Apr 20, 2013 8:26 pm
by BIGJIM
Before you read, I know the tube in the picture is an EVO tube, i was too lazy to go to the garage and get a Shovel tube.
Change out your stock early models, or make you late models leak proof.
Square Buna-N O-Ring AS568A Dash Number 208 $8.07 50pcs.
McMaster-Carr #4061T23
Square Buna-N O-Ring AS568A Dash Number 114 $10.68 100pcs.
McMaster-Carr #4061T16
Square Buna-N O-Ring AS568A Dash Number 016 $9.96 100pcs.
McMaster-Carr #4061T121
Square Buna-N O-Ring AS568A Dash Number 211 $7.71 50pcs.
McMaster-Carr #4061T233
Metric Spring Steel Shim
DIN 988, 1.0MM Thick, 18MM ID, 25MM OD. $7.76 25pcs.
McMaster-Carr #98055A232
Re: Sealing up ShovelHead pushrod Tubes,,,,,,,,,,,,,,made si
Posted: Sun Apr 21, 2013 9:25 am
by rudog
From the quantities listed above, do you offer conveniently packed kits? I'm sure many would be interested.
Re: Sealing up ShovelHead pushrod Tubes,,,,,,,,,,,,,,made si
Posted: Sun Apr 21, 2013 5:45 pm
by BIGJIM
Haven't really thought about it, I guess, because I buy them any way, I could throw some sets together.
Re: Sealing up ShovelHead pushrod Tubes,,,,,,,,,,,,,,made si
Posted: Sat May 18, 2013 3:39 am
by yona
MY Evo tubes are leaking..... more like weeping....enought to keep the cases nice and oily.... ; )
Re: Sealing up ShovelHead pushrod Tubes,,,,,,,,,,,,,,made si
Posted: Sun May 19, 2013 2:42 pm
by railroad bob
Cool, now you can mark yer spot!!!
Re: Sealing up ShovelHead pushrod Tubes,,,,,,,,,,,,,,made si
Posted: Sun May 19, 2013 3:42 pm
by yona
Since I hand dug this 100 ft driveway and mixed the concrete from 40 lb bags..... I don't think so........
Re: Sealing up ShovelHead pushrod Tubes,,,,,,,,,,,,,,made si
Posted: Wed May 22, 2013 12:34 am
by railroad bob
When I worked at a gas station, we would spread cat litter on oil spots and twist/crush it onto the concrete.
Seemed to get rid of the stain.
Re: Sealing up ShovelHead pushrod Tubes,,,,,,,,,,,,,,made si
Posted: Wed May 22, 2013 9:29 pm
by curt
tide laundry detergent and a good stiff broom
Re: Sealing up ShovelHead pushrod Tubes,,,,,,,,,,,,,,made si
Posted: Thu May 23, 2013 7:40 am
by yona
Do you put the kitty litter and the tide in the motor at the same time ..... and what do you do with the broom....?????? Oh, I have a few suggestions.... ; )))
Re: Sealing up ShovelHead pushrod Tubes,,,,,,,,,,,,,,made si
Posted: Thu May 23, 2013 7:42 am
by yona
BIGJIM wrote:Haven't really thought about it, I guess, because I buy them any way, I could throw some sets together.
Could you make me a kit for my Evo...?? PM me !
Re: Sealing up ShovelHead pushrod Tubes,,,,,,,,,,,,,,made si
Posted: Mon May 27, 2013 5:52 am
by BIGJIM
In a few weeks I will Start putting sets together, I am swamped for time right now.
Re: Sealing up ShovelHead pushrod Tubes,,,,,,,,,,,,,,made si
Posted: Mon May 27, 2013 10:00 am
by yona
I can wait... ; )))
Re: Sealing up ShovelHead pushrod Tubes,,,,,,,,,,,,,,made si
Posted: Sun Aug 25, 2013 12:07 pm
by yona
Bump.... Jim, I am having my bike completely gone over... what numbers would I need for a 87 Evo... ???
Re: Sealing up ShovelHead pushrod Tubes,,,,,,,,,,,,,,made si
Posted: Mon Aug 26, 2013 1:45 am
by railroad bob
yona wrote:Bump.... Jim, I am having my bike completely gone over... what numbers would I need for a 87 Evo... ???
I wold like that info also, if you can...
Thanks Jim.
Re: Sealing up ShovelHead pushrod Tubes,,,,,,,,,,,,,,made si
Posted: Sat Apr 05, 2014 11:26 am
by yona
Guess Jim never came up for air.... ; )