new project on deck

Try using this area for frontend information.
Post Reply
jbfrmca
Lurker
Posts: 66
Joined: Fri Dec 23, 2011 1:21 am
SELF INTRODUCTION: dan. my names john or jbfrmca on most boards . i was on the old board(not very much i'm afraid) been messing with bikes my whole life. still want to learn as much as i can while i can. thanks in advance. later john.

new project on deck

Post by jbfrmca »

got this 40 over springer the other day. got to find a frame then stretch it 4 out and 8 up with about a 55 degree rake. trail should be about 15 inches. that's good right? (sarcasm)
Image
User avatar
curt
Long in the Tooth
Posts: 1068
Joined: Tue Oct 25, 2011 11:36 am
SELF INTRODUCTION: hi everyone its me from the old bord hopeing to see everyone come here and all the newcomers . lets make this as good as the old one or even better . lookin foreward to seeing everyones projects continue and ill be continueing mine too
Location: utica new york

Re: new project on deck

Post by curt »

dam I like it
ever notice when you hit somethin or someone with a hammer you feel instantly better
krymis
Conventioneer
Posts: 277
Joined: Sun Nov 06, 2011 12:46 pm
SELF INTRODUCTION: Hey dan it chris (krymis) from the CBH board. thanks for opening this back up. hope to have a project to show the build here. BLAH BLAH BLAH BLAH BLAH and so on and so forth. The book of revolations and worlds ends and shit like that.....

Re: new project on deck

Post by krymis »

johnnyb you're still kickin man. good to see. hope all is good dig the springer
kheaton
Lurker
Posts: 69
Joined: Sat Jul 07, 2012 10:12 pm
SELF INTRODUCTION: My name is Ken Heaton. I've been in the medical field in the Army for the past 18 years and work on and build bikes as a hobby. My main hobby and goal is to think of parts that do not exist and make them or modify existing parts. I currently own a 99 Softtail that I bolted together, a 78 Triumph bobber that i built from the ground up, a 75 CB360 cafe, and a 76 Kawasaki KH500 that needs a lot of work. I joined the original forum about 8 years ago and I'm glad to see it up and running again!
Location: Augusta, GA

Re: new project on deck

Post by kheaton »

Nice bikes
Jeff L
Contributor
Posts: 687
Joined: Fri Oct 28, 2011 5:09 pm
SELF INTRODUCTION: Hey...I live in South Jersey (the Super Fund State) work as an Operating Engineer local825.Besides bikes I love to fish the surf.I have my current & seemingly endless project a BSA 750 Rocket3, a 72 Honda CB750,79 Kawasaki KZ1000, 48 Simplex, & a 62 Norton Atlas engine
Location: South Jersey

Re: new project on deck

Post by Jeff L »

Nice...Long Bikes are the Shit Man
Changing the shape of the Earth...1 bucket at a time...IUOE local 825 top of the food chain
jbfrmca
Lurker
Posts: 66
Joined: Fri Dec 23, 2011 1:21 am
SELF INTRODUCTION: dan. my names john or jbfrmca on most boards . i was on the old board(not very much i'm afraid) been messing with bikes my whole life. still want to learn as much as i can while i can. thanks in advance. later john.

Re: new project on deck

Post by jbfrmca »

well i found out the trail was going to be about 18 inches. that was too much for me so i did this. i got the idea from mr moore. he does this to get the trail back in line. mine should be about 8 inches.
Image
started with this. did'nt work too good.
/albums/k92/jbfrmca/IMG_2293_zps5c04978a.jpg[/IMG][/URL]
ended up cutting it out with cutoff wheels.
Image
old and new.
Image
i still have to do the final cleanup and get this aligned and welded. adding this will give me 6 degrees over the stock one.
Image
User avatar
Customize IT
Contributor
Posts: 992
Joined: Thu Sep 19, 2013 7:54 am
SELF INTRODUCTION: I am a young punk kid that needs some help building himself a chopper!!

I am sorry I only have a hotmail account???

Tell me what I need to do I need help with my girder!!!

PLESE HELP????


[url=http://imgur.com/8saXkqN][img]http://i.imgur.com/8saXkqNl.jpg[/img][/url]








[url=http://imgur.com/pXJZqQ0][img]http://i.imgur.com/pXJZqQ0l.jpg[/img][/url]









[url=http://imgur.com/T3Q4Ev4][img]http://i.imgur.com/T3Q4Ev4l.jpg[/img][/url]









[url=http://imgur.com/fsXGYQw][img]http://i.imgur.com/fsXGYQwl.jpg[/img][/url]
Location: Ohio, USA

Re: new project on deck

Post by Customize IT »

Brillant idea and nice work and wish I had that collection of bikes!!

I am a little slow sometimes and was wondering???

It looks like a negative trail of 8in!!!???

Am I looking at it wrong????
jbfrmca
Lurker
Posts: 66
Joined: Fri Dec 23, 2011 1:21 am
SELF INTRODUCTION: dan. my names john or jbfrmca on most boards . i was on the old board(not very much i'm afraid) been messing with bikes my whole life. still want to learn as much as i can while i can. thanks in advance. later john.

Re: new project on deck

Post by jbfrmca »

this what i started with. this bar is centered on the rear leg. so the center of the bar is about 18 inches. now when i bring back the stem it should be around 8 inches or so. i am by no means a mathamagician and i'm pretty much flying by the seat of my pants.but the way i figure it at 18 inches of trail i couldn't go wrong by deraking the stem 6 degrees.
Image
this is the way it sat with the 18 inches of trail. everything will be the same except the stem will be deraked and the rake will be at 55 degrees instead of 60.
Image
User avatar
Customize IT
Contributor
Posts: 992
Joined: Thu Sep 19, 2013 7:54 am
SELF INTRODUCTION: I am a young punk kid that needs some help building himself a chopper!!

I am sorry I only have a hotmail account???

Tell me what I need to do I need help with my girder!!!

PLESE HELP????


[url=http://imgur.com/8saXkqN][img]http://i.imgur.com/8saXkqNl.jpg[/img][/url]








[url=http://imgur.com/pXJZqQ0][img]http://i.imgur.com/pXJZqQ0l.jpg[/img][/url]









[url=http://imgur.com/T3Q4Ev4][img]http://i.imgur.com/T3Q4Ev4l.jpg[/img][/url]









[url=http://imgur.com/fsXGYQw][img]http://i.imgur.com/fsXGYQwl.jpg[/img][/url]
Location: Ohio, USA

Re: new project on deck

Post by Customize IT »

That is going to be a killer looking bike when done!!!!

They have raked the heck out of that frame????

Thanks for showing me!!
Indian Mark
General Smart-Ass
Posts: 231
Joined: Wed Nov 09, 2011 1:30 pm
SELF INTRODUCTION: So,...I guess I'm a newb. Can I get my "General Smart-Ass" moniker back, or do I actually have to build something. Like a chopper for example. I am hoping to re-start a build that's been sitting in my shop for a couple years with most of the parts already acquired.
Just wanted to thank Dan and anyone else involved in getting this board up and running.
Dan is a personal friend of mine and one of the finest people I know. I have a world of respect for him, not just for his work here but also for reasons beyond this forum.
Not sure if that's 200 words, but that's my intro and I'm sticking to it.
BTW, I'm Mark. Not Indian, just a fanatic of the motorcycle brand.

Re: new project on deck

Post by Indian Mark »

Holy Crap! Looking forward to this one.
User avatar
curt
Long in the Tooth
Posts: 1068
Joined: Tue Oct 25, 2011 11:36 am
SELF INTRODUCTION: hi everyone its me from the old bord hopeing to see everyone come here and all the newcomers . lets make this as good as the old one or even better . lookin foreward to seeing everyones projects continue and ill be continueing mine too
Location: utica new york

Re: new project on deck

Post by curt »

:mrgreen:
ever notice when you hit somethin or someone with a hammer you feel instantly better
User avatar
jonester123
Builder
Posts: 402
Joined: Tue Oct 25, 2011 12:06 pm
SELF INTRODUCTION: Hello guys and gals, working on my 1979 honda cb750 bobber chopper build plus many other projects etc. I have two workshops at home that i built so i can build bikes and all sorts of parts, and i mainly do auto body work and restoration repairs etc.
Location: Armstrong B.C Canada
Contact:

Re: new project on deck

Post by jonester123 »

Cool man, You will need a city block just to turn around when turning hahaha :D :obscene-drinkingcheers:
User avatar
railroad bob
Contributor
Posts: 939
Joined: Fri Nov 04, 2011 10:07 pm
SELF INTRODUCTION: Hi Dan, thanks for your time and energy spent on this new board. I hope you will give me a waiver on the email account, I have used gmail so long I don't have a clue what my service provider account is.
I just returned home from a 2 week trip in New Mexico, have a few good pix, can't wait to share my off-highway traveling. Got to put 1400 miles on the scoot.

Best, Bob Davidson
Location: Alaska

Re: new project on deck

Post by railroad bob »

Long bikes just look so fucking cool. They ride better than people think.
Alaska - Land of the Individual and Other Endangered Species
An Armed Society is a Polite Society,...
Politicians Prefer Unarmed Peasants
TANSTAAFL
User avatar
curt
Long in the Tooth
Posts: 1068
Joined: Tue Oct 25, 2011 11:36 am
SELF INTRODUCTION: hi everyone its me from the old bord hopeing to see everyone come here and all the newcomers . lets make this as good as the old one or even better . lookin foreward to seeing everyones projects continue and ill be continueing mine too
Location: utica new york

Re: new project on deck

Post by curt »

railroad bob wrote:Long bikes just look so fucking cool. They ride better than people think.



yes they do
ever notice when you hit somethin or someone with a hammer you feel instantly better
Post Reply

Return to “Springers, Girders, Spirders and Leafers”