Page 7 of 8

Re: Building a Girder for my Honda Rebel 250

Posted: Fri Dec 12, 2014 12:00 am
by Customize IT
I just use the tach on mine i know in what gear 35 and 55 are.

Re: Building a Girder for my Honda Rebel 250

Posted: Mon Dec 15, 2014 10:46 am
by Swamprabbit1
This bike tops out at between 65 and 70 mph. It cruises comfortably at 50 to 55 mph. I would have to be cutting up to get a speeding ticket with it. But it is possible to get one. LOL
In a school zone. He he he

Re: Building a Girder for my Honda Rebel 250

Posted: Thu Dec 18, 2014 3:26 pm
by Swamprabbit1
Can't just show all the good. Must show the bad also. Will be building a new set of legs. Welds were not as good as I wanted them to be. Took them to someone I thought would do a good job due to me not having a 220 welder. Hey it happens.
Didn't look right in a couple spots so I went digging to inspect penatration. This is what I found. Thought about grinding and rewelding. But just going to rebuild. A peace at mind thing.

Image

Image

Re: Building a Girder for my Honda Rebel 250

Posted: Thu Dec 18, 2014 3:30 pm
by Swamprabbit1
Did some work on the handle bars today. Drilled holes for plug welding in the threaded slugs. Got them welded and cleaned up. Time for the emory cloth.

Image

Image

Image

Re: Building a Girder for my Honda Rebel 250

Posted: Thu Dec 18, 2014 3:31 pm
by Swamprabbit1
Image

Image

Re: Building a Girder for my Honda Rebel 250

Posted: Thu Dec 18, 2014 11:05 pm
by Jeff L
Wow dude...you're workin on the livingroom carpet? Good for you...lol...Why don't you take it somewhere else & see what they say about grinding itbout &rewelding? Think that should be fixable.

Re: Building a Girder for my Honda Rebel 250

Posted: Fri Dec 19, 2014 3:18 pm
by Swamprabbit1
Jeff L wrote:Wow dude...you're workin on the livingroom carpet? Good for you...lol...Why don't you take it somewhere else & see what they say about grinding itbout &rewelding? Think that should be fixable.
Jeff this is all learning for me any way. I'm going to rebuild. It more of a mind thing. Peace of mind.

Re: Building a Girder for my Honda Rebel 250

Posted: Fri Dec 19, 2014 3:22 pm
by Swamprabbit1
Bottom link made. Now I can work in the table with them. Bottom link will be welded to the bars. Then molded in or trimmed up for a cleaner look.

Image

Image

Re: Building a Girder for my Honda Rebel 250

Posted: Mon Dec 22, 2014 2:00 pm
by Swamprabbit1
Just a little sneak peak at what Joshua Cater is working his leather magic and tooling up for me.

Image

Image

Re: Building a Girder for my Honda Rebel 250

Posted: Sun Jan 11, 2015 12:06 am
by Swamprabbit1
Well here are my covers. Valve cover still to be done.

Image

Image

Image

Image

Re: Building a Girder for my Honda Rebel 250

Posted: Sun Jan 11, 2015 12:07 am
by Swamprabbit1
Wizard started tooling up the seat.

Image

Re: Building a Girder for my Honda Rebel 250

Posted: Sun Jan 11, 2015 7:32 am
by gearhead1951
I seem to get a vibe that you might possibly be a grunt , either active or retired I

( Ah could , Ah say Ah COULD be wrong )

:D :auto-dirtbike: :obscene-drinkingcheers:

EN1(SW) R.D. King Ret.

Re: Building a Girder for my Honda Rebel 250

Posted: Sun Jan 11, 2015 7:43 am
by gearhead1951
By the way , Are you gonna paint this wee beastie olive drab , camo or USMC dress uniform colors !! :dance: :lol: :obscene-drinkingcheers:

Re: Building a Girder for my Honda Rebel 250

Posted: Tue Jan 13, 2015 2:11 pm
by Swamprabbit1
gearhead1951 wrote:By the way , Are you gonna paint this wee beastie olive drab , camo or USMC dress uniform colors !! :dance: :lol: :obscene-drinkingcheers:
Going with Alpha Dress Blue Uniform. Spend 8 years in the service. 4 years Blue side (Navy) and 4 years Green side (USMC).
I did all the layout for the lettering (because I was doing the lettering myself). He did the rest. Learned a lot from this. Next time let the Engraver do it all. He he he
Received these pictures from the engraver this weekend. Valve cover's not done yet.

Image

Image

Image

Image

Re: Building a Girder for my Honda Rebel 250

Posted: Fri Feb 06, 2015 11:21 pm
by Swamprabbit1
Solid tail section and tail light arrived this week. Slowly but surely coming along.
Image

Image

Image

Image