Page 1 of 1
Guzzi chop
Posted: Mon Mar 16, 2015 6:25 pm
by Maz
So a good friend asks me to sort out the Guzzi chop he's started building - he's bought an off-the-shelf frame and stripped his accident damaged Guzzi... first problem was the drive shaft was hitting the tyre....
- guzzi001.jpg (59.83 KiB) Viewed 4383 times
so a quick look found this problem.....
- guzzichop001.jpg (49.25 KiB) Viewed 4383 times
and the other side....
- guzzichop002.jpg (50.76 KiB) Viewed 4383 times
Soon sorted.....
- guzzichop003.jpg (52.98 KiB) Viewed 4383 times
front end to sort out next....
- guzzi002.jpg (63.2 KiB) Viewed 4383 times
Maz
Re: Guzzi chop
Posted: Mon Mar 16, 2015 11:08 pm
by Dusty-Dave
Need to turn the drive shaft around to put the u-joint at the front. It would ride a lot smoother with the double joint at the front like the older bikes used. If it still hits space the hub farther to the right then off set lace the rim to center. You can usually ofset a half inch or so with stock spokes.
Dusty
Re: Guzzi chop
Posted: Wed Mar 18, 2015 2:20 pm
by Indian Mark
cool project. Keep us posted as it progresses.