Slow Build

Post your ongoing projects in this section.
hansgoudzwaard
Contributor
Posts: 804
Joined: Wed Oct 26, 2011 10:43 pm
SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.

Re: Slow Build

Post by hansgoudzwaard »

Yeah, It was like 2 for 1(almost) so I said sure.
User avatar
Maxthegardener
Builder
Posts: 384
Joined: Tue Oct 25, 2011 11:28 am
SELF INTRODUCTION: Name is Max living in scotland ,and building my first bike, Which is derived from a buellM2 Cyclone..Started with an engine and a Drop seat frame wich was made to my spec by a more experienced builder. would like to learn more about the skills and techniques required to build a frame so I value being a member here...Cheers Max
Location: Angus, Scotland

Re: Slow Build

Post by Maxthegardener »

metal.... :D think Maz is moving?
hansgoudzwaard
Contributor
Posts: 804
Joined: Wed Oct 26, 2011 10:43 pm
SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.

Re: Slow Build

Post by hansgoudzwaard »

Maxthegardener wrote:metal.... :D think Maz is moving?
To a new shop?

Sold the Buell. He picks it up tomorrow.

The Vancouver club out for a ride.
Trying to Pass??
Trying to Pass??
HawgsDenRide.JPG (53.82 KiB) Viewed 6525 times
hansgoudzwaard
Contributor
Posts: 804
Joined: Wed Oct 26, 2011 10:43 pm
SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.

Re: Slow Build

Post by hansgoudzwaard »

BuellMoney. Say it real fast & it sounds like oil money.
This is Canadian OIL money!!Dirty Oil.
This is Canadian OIL money!!Dirty Oil.
BuellMunny.JPG (125.17 KiB) Viewed 6514 times
Jeff L
Contributor
Posts: 687
Joined: Fri Oct 28, 2011 5:09 pm
SELF INTRODUCTION: Hey...I live in South Jersey (the Super Fund State) work as an Operating Engineer local825.Besides bikes I love to fish the surf.I have my current & seemingly endless project a BSA 750 Rocket3, a 72 Honda CB750,79 Kawasaki KZ1000, 48 Simplex, & a 62 Norton Atlas engine
Location: South Jersey

Re: Slow Build

Post by Jeff L »

However You say it....it sure looks good
Changing the shape of the Earth...1 bucket at a time...IUOE local 825 top of the food chain
hansgoudzwaard
Contributor
Posts: 804
Joined: Wed Oct 26, 2011 10:43 pm
SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.

Re: Slow Build

Post by hansgoudzwaard »

Yeah, I got back what I paid for it.

Crazy tho' even gold isn't stable.
User avatar
railroad bob
Contributor
Posts: 939
Joined: Fri Nov 04, 2011 10:07 pm
SELF INTRODUCTION: Hi Dan, thanks for your time and energy spent on this new board. I hope you will give me a waiver on the email account, I have used gmail so long I don't have a clue what my service provider account is.
I just returned home from a 2 week trip in New Mexico, have a few good pix, can't wait to share my off-highway traveling. Got to put 1400 miles on the scoot.

Best, Bob Davidson
Location: Alaska

Re: Slow Build

Post by railroad bob »

Bitcoins are the new currency, and even they might be replaced by ammunition.

Nice deal Hans...
Alaska - Land of the Individual and Other Endangered Species
An Armed Society is a Polite Society,...
Politicians Prefer Unarmed Peasants
TANSTAAFL
hansgoudzwaard
Contributor
Posts: 804
Joined: Wed Oct 26, 2011 10:43 pm
SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.

Re: Slow Build

Post by hansgoudzwaard »

I like the "guns or butter" analogy. I know I digress. If the hard choices came, Bob, it would have to be guns.
http://en.anarchopedia.org/Guns_or_Butter
ohoh...
ohoh...
GorBEE.JPG (46.07 KiB) Viewed 6478 times
hansgoudzwaard
Contributor
Posts: 804
Joined: Wed Oct 26, 2011 10:43 pm
SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.

Re: Slow Build

Post by hansgoudzwaard »

HA!!

I dusted the spiders off and had a look!! I picked this Evo up 2 months ago, ordered a charging system for it 3 days ago.
Has an S&S Shortie E carb
Has an S&S Shortie E carb
Happyevo.JPG (50.03 KiB) Viewed 6204 times
User avatar
curt
Long in the Tooth
Posts: 1068
Joined: Tue Oct 25, 2011 11:36 am
SELF INTRODUCTION: hi everyone its me from the old bord hopeing to see everyone come here and all the newcomers . lets make this as good as the old one or even better . lookin foreward to seeing everyones projects continue and ill be continueing mine too
Location: utica new york

Re: Slow Build

Post by curt »

nice
ever notice when you hit somethin or someone with a hammer you feel instantly better
hansgoudzwaard
Contributor
Posts: 804
Joined: Wed Oct 26, 2011 10:43 pm
SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.

Re: Slow Build

Post by hansgoudzwaard »

curt wrote:nice
It came out of a '98 softtail. I Am planning a five speed with a 2 inch open belt.
User avatar
railroad bob
Contributor
Posts: 939
Joined: Fri Nov 04, 2011 10:07 pm
SELF INTRODUCTION: Hi Dan, thanks for your time and energy spent on this new board. I hope you will give me a waiver on the email account, I have used gmail so long I don't have a clue what my service provider account is.
I just returned home from a 2 week trip in New Mexico, have a few good pix, can't wait to share my off-highway traveling. Got to put 1400 miles on the scoot.

Best, Bob Davidson
Location: Alaska

Re: Slow Build

Post by railroad bob »

I'm partial to Crane HI-4 myself, but there are others that work just fine.
Alaska - Land of the Individual and Other Endangered Species
An Armed Society is a Polite Society,...
Politicians Prefer Unarmed Peasants
TANSTAAFL
hansgoudzwaard
Contributor
Posts: 804
Joined: Wed Oct 26, 2011 10:43 pm
SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.

I'm learning this stuff....

Post by hansgoudzwaard »

railroad bob wrote:I'm partial to Crane HI-4 myself, but there are others that work just fine.
And any advice is good. This is covered quite well when I do a search. It seems like a good system.
User avatar
Maxthegardener
Builder
Posts: 384
Joined: Tue Oct 25, 2011 11:28 am
SELF INTRODUCTION: Name is Max living in scotland ,and building my first bike, Which is derived from a buellM2 Cyclone..Started with an engine and a Drop seat frame wich was made to my spec by a more experienced builder. would like to learn more about the skills and techniques required to build a frame so I value being a member here...Cheers Max
Location: Angus, Scotland

Re: Slow Build

Post by Maxthegardener »

I thought youd be done by now Hanz... :popcorn:
hansgoudzwaard
Contributor
Posts: 804
Joined: Wed Oct 26, 2011 10:43 pm
SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.

Re: Slow Build

Post by hansgoudzwaard »

You know the phrase " holy monkeyboots? Hi Max good to see you.
Post Reply

Return to “Project Build-Logs”