xt500

Post your ongoing projects in this section.
dirtbag
Lurker
Posts: 57
Joined: Fri Dec 20, 2013 12:57 am
SELF INTRODUCTION: I was on the old forum, I have more tools and more projects now, I have a wide range of projects , home built boats, a few buggies, snowmachines and a few snowhawks, latly I have been collecting old broken machines most recently a marvel roll in bandsaw, and a old lathe that needs some love from 1908, and about 10 bike projects, most were not running when i got them , same with my mill and bandsaw I had to get them operable. Looking to further my knowledge and share what i can offer..

xt500

Post by dirtbag »

So heres my 79 xt500. Built the frame a few yrs back. I did the axle plates with a grinder and die grinder, actually did just about everything with those 2, used a level and plumbbobs and followed garys write ups,except for the axle plates those I copied blackjacks design off the font, the frame is not to much different then the old harley frame geometry from garys plans.. i built a drop seat frame first and messed up a measurement then decided old school style is where its all at..
A quick mock up, I didnt take any pics of the frame build, it was about 5 yrs ago now
Image

no pics of progress to this point, usually just read and dont post so this is getting to be a new thing, shareing my progress with projects so jumping ahead
Image
Image
Image
Image
dirtbag
Lurker
Posts: 57
Joined: Fri Dec 20, 2013 12:57 am
SELF INTRODUCTION: I was on the old forum, I have more tools and more projects now, I have a wide range of projects , home built boats, a few buggies, snowmachines and a few snowhawks, latly I have been collecting old broken machines most recently a marvel roll in bandsaw, and a old lathe that needs some love from 1908, and about 10 bike projects, most were not running when i got them , same with my mill and bandsaw I had to get them operable. Looking to further my knowledge and share what i can offer..

Re: xt500

Post by dirtbag »

Image
Image
Image
So this is the spring set up..I found one on the back to help control the front lifting seemed like it might work
Image
User avatar
Customize IT
Contributor
Posts: 992
Joined: Thu Sep 19, 2013 7:54 am
SELF INTRODUCTION: I am a young punk kid that needs some help building himself a chopper!!

I am sorry I only have a hotmail account???

Tell me what I need to do I need help with my girder!!!

PLESE HELP????


[url=http://imgur.com/8saXkqN][img]http://i.imgur.com/8saXkqNl.jpg[/img][/url]








[url=http://imgur.com/pXJZqQ0][img]http://i.imgur.com/pXJZqQ0l.jpg[/img][/url]









[url=http://imgur.com/T3Q4Ev4][img]http://i.imgur.com/T3Q4Ev4l.jpg[/img][/url]









[url=http://imgur.com/fsXGYQw][img]http://i.imgur.com/fsXGYQwl.jpg[/img][/url]
Location: Ohio, USA

Re: xt500

Post by Customize IT »

Man the more I see of your work! WOW!

Please post all pics you can!
gearhead1951
Builder
Posts: 367
Joined: Wed Oct 26, 2011 4:49 am
SELF INTRODUCTION: I am an expat tennessee hillbilly and retired us navy engineer livin' in Scotland and I have a love of old cars , trucks, motorcycles and most any other machinery !

I dont know if I can think of enough to say to reach the two hundred charactor minimun set by the mods , but I will persevere
Location: Greenock Scotland

Re: xt500

Post by gearhead1951 »

any idea why only the left side of the pics are showing ?? :confusion-shrug:
User avatar
Customize IT
Contributor
Posts: 992
Joined: Thu Sep 19, 2013 7:54 am
SELF INTRODUCTION: I am a young punk kid that needs some help building himself a chopper!!

I am sorry I only have a hotmail account???

Tell me what I need to do I need help with my girder!!!

PLESE HELP????


[url=http://imgur.com/8saXkqN][img]http://i.imgur.com/8saXkqNl.jpg[/img][/url]








[url=http://imgur.com/pXJZqQ0][img]http://i.imgur.com/pXJZqQ0l.jpg[/img][/url]









[url=http://imgur.com/T3Q4Ev4][img]http://i.imgur.com/T3Q4Ev4l.jpg[/img][/url]









[url=http://imgur.com/fsXGYQw][img]http://i.imgur.com/fsXGYQwl.jpg[/img][/url]
Location: Ohio, USA

Re: xt500

Post by Customize IT »

He is loading them bigger than a large thumb nail and this board just cuts the pic link off past the allowed size.
gearhead1951
Builder
Posts: 367
Joined: Wed Oct 26, 2011 4:49 am
SELF INTRODUCTION: I am an expat tennessee hillbilly and retired us navy engineer livin' in Scotland and I have a love of old cars , trucks, motorcycles and most any other machinery !

I dont know if I can think of enough to say to reach the two hundred charactor minimun set by the mods , but I will persevere
Location: Greenock Scotland

Re: xt500

Post by gearhead1951 »

Finally , a reasonable explanation ! Guess you aint all that computer illiterate (unlike me )
User avatar
Customize IT
Contributor
Posts: 992
Joined: Thu Sep 19, 2013 7:54 am
SELF INTRODUCTION: I am a young punk kid that needs some help building himself a chopper!!

I am sorry I only have a hotmail account???

Tell me what I need to do I need help with my girder!!!

PLESE HELP????


[url=http://imgur.com/8saXkqN][img]http://i.imgur.com/8saXkqNl.jpg[/img][/url]








[url=http://imgur.com/pXJZqQ0][img]http://i.imgur.com/pXJZqQ0l.jpg[/img][/url]









[url=http://imgur.com/T3Q4Ev4][img]http://i.imgur.com/T3Q4Ev4l.jpg[/img][/url]









[url=http://imgur.com/fsXGYQw][img]http://i.imgur.com/fsXGYQwl.jpg[/img][/url]
Location: Ohio, USA

Re: xt500

Post by Customize IT »

I am learning?
Where you all at on facebook?
I have come into the 2st century last night!

ME link like to see what you guys are doing there?
https://www.facebook.com/nathan.ferguson.56808
dirtbag
Lurker
Posts: 57
Joined: Fri Dec 20, 2013 12:57 am
SELF INTRODUCTION: I was on the old forum, I have more tools and more projects now, I have a wide range of projects , home built boats, a few buggies, snowmachines and a few snowhawks, latly I have been collecting old broken machines most recently a marvel roll in bandsaw, and a old lathe that needs some love from 1908, and about 10 bike projects, most were not running when i got them , same with my mill and bandsaw I had to get them operable. Looking to further my knowledge and share what i can offer..

Re: xt500

Post by dirtbag »

If you click on the pic it takes you to the bigger pic..

Image
Image
Made a cross bar to mount my plates
Image
Image
Image
Image
Image
Image
dirtbag
Lurker
Posts: 57
Joined: Fri Dec 20, 2013 12:57 am
SELF INTRODUCTION: I was on the old forum, I have more tools and more projects now, I have a wide range of projects , home built boats, a few buggies, snowmachines and a few snowhawks, latly I have been collecting old broken machines most recently a marvel roll in bandsaw, and a old lathe that needs some love from 1908, and about 10 bike projects, most were not running when i got them , same with my mill and bandsaw I had to get them operable. Looking to further my knowledge and share what i can offer..

Re: xt500

Post by dirtbag »

Back on the lathe.
Image
Image
Image
Image
Image
Image
Image
Image
Image

More to come
User avatar
Customize IT
Contributor
Posts: 992
Joined: Thu Sep 19, 2013 7:54 am
SELF INTRODUCTION: I am a young punk kid that needs some help building himself a chopper!!

I am sorry I only have a hotmail account???

Tell me what I need to do I need help with my girder!!!

PLESE HELP????


[url=http://imgur.com/8saXkqN][img]http://i.imgur.com/8saXkqNl.jpg[/img][/url]








[url=http://imgur.com/pXJZqQ0][img]http://i.imgur.com/pXJZqQ0l.jpg[/img][/url]









[url=http://imgur.com/T3Q4Ev4][img]http://i.imgur.com/T3Q4Ev4l.jpg[/img][/url]









[url=http://imgur.com/fsXGYQw][img]http://i.imgur.com/fsXGYQwl.jpg[/img][/url]
Location: Ohio, USA

Re: xt500

Post by Customize IT »

THANK YOU SO MUCH for showing those!

I have to build some soon!
Jeff L
Contributor
Posts: 687
Joined: Fri Oct 28, 2011 5:09 pm
SELF INTRODUCTION: Hey...I live in South Jersey (the Super Fund State) work as an Operating Engineer local825.Besides bikes I love to fish the surf.I have my current & seemingly endless project a BSA 750 Rocket3, a 72 Honda CB750,79 Kawasaki KZ1000, 48 Simplex, & a 62 Norton Atlas engine
Location: South Jersey

Re: xt500

Post by Jeff L »

Good Stuff Man
Changing the shape of the Earth...1 bucket at a time...IUOE local 825 top of the food chain
dirtbag
Lurker
Posts: 57
Joined: Fri Dec 20, 2013 12:57 am
SELF INTRODUCTION: I was on the old forum, I have more tools and more projects now, I have a wide range of projects , home built boats, a few buggies, snowmachines and a few snowhawks, latly I have been collecting old broken machines most recently a marvel roll in bandsaw, and a old lathe that needs some love from 1908, and about 10 bike projects, most were not running when i got them , same with my mill and bandsaw I had to get them operable. Looking to further my knowledge and share what i can offer..

Re: xt500

Post by dirtbag »

Cool, so I took the stock pivot for the brake linkadge and made a brass bushing and outer sleeve for my brake
Image
Image
Image
Then I did a little messing around on the machines
Image
Image
dirtbag
Lurker
Posts: 57
Joined: Fri Dec 20, 2013 12:57 am
SELF INTRODUCTION: I was on the old forum, I have more tools and more projects now, I have a wide range of projects , home built boats, a few buggies, snowmachines and a few snowhawks, latly I have been collecting old broken machines most recently a marvel roll in bandsaw, and a old lathe that needs some love from 1908, and about 10 bike projects, most were not running when i got them , same with my mill and bandsaw I had to get them operable. Looking to further my knowledge and share what i can offer..

Re: xt500

Post by dirtbag »

A little more milling
Image
Parts ready to weld up for a kickstand
Image
Image
Image
Image
dirtbag
Lurker
Posts: 57
Joined: Fri Dec 20, 2013 12:57 am
SELF INTRODUCTION: I was on the old forum, I have more tools and more projects now, I have a wide range of projects , home built boats, a few buggies, snowmachines and a few snowhawks, latly I have been collecting old broken machines most recently a marvel roll in bandsaw, and a old lathe that needs some love from 1908, and about 10 bike projects, most were not running when i got them , same with my mill and bandsaw I had to get them operable. Looking to further my knowledge and share what i can offer..

Re: xt500

Post by dirtbag »

So my tailight started as a piece of aluminum square stock, and a brass housing I turned down just messing around,I am a avid follower of selectgrubs work, haveing studied his how to write ups, I was finally eager to try to apply myself to this art form,as I was thinking about it I stubled onto a gold ring on the ground, I took it as a sign and cut it up.
Here it is before being epoxied together, I have tapped the housing and the mount and made a hollow threaded connector, and drilled a hole to run wires through it all.
Image
Image
And
Image
Image
Image
Image
dirtbag
Lurker
Posts: 57
Joined: Fri Dec 20, 2013 12:57 am
SELF INTRODUCTION: I was on the old forum, I have more tools and more projects now, I have a wide range of projects , home built boats, a few buggies, snowmachines and a few snowhawks, latly I have been collecting old broken machines most recently a marvel roll in bandsaw, and a old lathe that needs some love from 1908, and about 10 bike projects, most were not running when i got them , same with my mill and bandsaw I had to get them operable. Looking to further my knowledge and share what i can offer..

Re: xt500

Post by dirtbag »

The rear fender is my ironhead fender I cut a inch or so out of and welded up, I wanted a narrow fender
Image
So i dont know if I will run this yet but mess with it a bit here and there, I orderd a light kit from led supply with a aluminum housing, so I start with this
Image
And here the aluminum piece fits the brass, I was going to make it out of brass to but the aluminum will look good all polished up
Image
So a bit of milling and drilled a through hole, screwed in a connector hollow threaded rod and drilled through in from below then welded and grinded the through hole up and radiused it (grinding) Image
Image
Post Reply

Return to “Project Build-Logs”