Page 1 of 1

Some tools

Posted: Wed Apr 11, 2012 11:48 pm
by concrete guy
Here are some wheels I turned down for my truing stand to balance my flywheels, ABEC 3 bearings.

Image

I made two sets of shafts to mount the flywheels on. One for sprocket shaft taper and the other for the pinion taper.

Image

Truing stand

Image

This tool mounts inside the left case in the timken bearings. It has a short piece of DOM tube in it just for the picture. The actual one I use is 20" long and goes through a precision pilot in the pinion race. I used this to dial in on the mainshafts centerline so I could deck my cases.

Image

Re: Some tools

Posted: Wed Apr 11, 2012 11:52 pm
by concrete guy
Image

Image

Image

Image

Re: Some tools

Posted: Wed Apr 11, 2012 11:56 pm
by concrete guy
Image

Tool to pull the timken races out of the left case.

Image

Image

Image

Re: Some tools

Posted: Thu Apr 12, 2012 12:08 am
by concrete guy
Tool for holding my rods for weighing the top half and bottom half.

Image

Image

I used skateboard wheel bearings for the bushings that ride in the rod ends.

Image

Image

Re: Some tools

Posted: Thu Apr 12, 2012 12:12 am
by concrete guy
Tool to pull the oil pump shaft bushing out of the case.

Image

Image

Image

Re: Some tools

Posted: Thu Apr 12, 2012 12:21 am
by concrete guy
The beginning of a cam bearing puller

Image

Image

Image

Image

Image

Re: Some tools

Posted: Thu Apr 12, 2012 12:27 am
by concrete guy
Image

Image

Image

Image

Image

Image

Re: Some tools

Posted: Thu Apr 12, 2012 3:48 am
by railroad bob
Scott, thats very cool man...
Apparently you don't watch much TV in the cold dark winter, LOL

Re: Some tools

Posted: Thu Apr 12, 2012 7:58 am
by concrete guy
[quote="railroad bob"]Scott, thats very cool man...
Apparently you don't watch much TV in the cold dark winter, LOL[/quote

LOL! It seems I still get plenty of TV time Bob!

Thanks

Re: Some tools

Posted: Fri Sep 16, 2016 12:20 pm
by saex
Great pictures Scott i've got my motor to do so will have to build a truing rig and some tooling.