Gary

The general bullshit and chatty section where we post general gossip.
Post Reply
krymis
Conventioneer
Posts: 275
Joined: Sun Nov 06, 2011 12:46 pm
SELF INTRODUCTION: Hey dan it chris (krymis) from the CBH board. thanks for opening this back up. hope to have a project to show the build here. BLAH BLAH BLAH BLAH BLAH and so on and so forth. The book of revolations and worlds ends and shit like that.....

Gary

Post by krymis » Mon Oct 30, 2017 12:25 pm

Anybody heard from Gary? He is MIA in Texas. He had some health issues and we are trying to find him and see if he is okay. His business partner at Wylie Choppers has not seen nor heard from him. I talked to him like once a week and I have just been sent to voice mail after all the rings. Just wanting to see if he is ok.

jbfrmca
Lurker
Posts: 65
Joined: Fri Dec 23, 2011 1:21 am
SELF INTRODUCTION: dan. my names john or jbfrmca on most boards . i was on the old board(not very much i'm afraid) been messing with bikes my whole life. still want to learn as much as i can while i can. thanks in advance. later john.

Re: Gary

Post by jbfrmca » Mon Oct 30, 2017 11:59 pm

i read on the handbook site that he was moving to the reno area.

krymis
Conventioneer
Posts: 275
Joined: Sun Nov 06, 2011 12:46 pm
SELF INTRODUCTION: Hey dan it chris (krymis) from the CBH board. thanks for opening this back up. hope to have a project to show the build here. BLAH BLAH BLAH BLAH BLAH and so on and so forth. The book of revolations and worlds ends and shit like that.....

Re: Gary

Post by krymis » Wed Nov 15, 2017 10:05 am

Nobody seems to know. The friends in Cali, Texas and a few other places have not heard from him. Last we heard he had some severe health problems and we are concerned.

User avatar
curt
Contributor
Posts: 930
Joined: Tue Oct 25, 2011 11:36 am
SELF INTRODUCTION: hi everyone its me from the old bord hopeing to see everyone come here and all the newcomers . lets make this as good as the old one or even better . lookin foreward to seeing everyones projects continue and ill be continueing mine too
Location: utica new york

Re: Gary

Post by curt » Wed Nov 15, 2017 8:52 pm

hope he is found ok
ever notice when you hit somethin or someone with a hammer you feel instantly better

hansgoudzwaard
Contributor
Posts: 786
Joined: Wed Oct 26, 2011 10:43 pm
SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.

Re: Gary

Post by hansgoudzwaard » Fri Nov 17, 2017 9:37 pm

That's pretty scary when friends drop from sight.
Hope this gets resolved...soon.

hansgoudzwaard
Contributor
Posts: 786
Joined: Wed Oct 26, 2011 10:43 pm
SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.

Re: Gary

Post by hansgoudzwaard » Thu Nov 23, 2017 5:20 pm

Has he been found?

krymis
Conventioneer
Posts: 275
Joined: Sun Nov 06, 2011 12:46 pm
SELF INTRODUCTION: Hey dan it chris (krymis) from the CBH board. thanks for opening this back up. hope to have a project to show the build here. BLAH BLAH BLAH BLAH BLAH and so on and so forth. The book of revolations and worlds ends and shit like that.....

Re: Gary

Post by krymis » Wed Dec 20, 2017 9:29 am

no sir.

Indian Mark
General Smart-Ass
Posts: 215
Joined: Wed Nov 09, 2011 1:30 pm
SELF INTRODUCTION: So,...I guess I'm a newb. Can I get my "General Smart-Ass" moniker back, or do I actually have to build something. Like a chopper for example. I am hoping to re-start a build that's been sitting in my shop for a couple years with most of the parts already acquired.
Just wanted to thank Dan and anyone else involved in getting this board up and running.
Dan is a personal friend of mine and one of the finest people I know. I have a world of respect for him, not just for his work here but also for reasons beyond this forum.
Not sure if that's 200 words, but that's my intro and I'm sticking to it.
BTW, I'm Mark. Not Indian, just a fanatic of the motorcycle brand.

Re: Gary

Post by Indian Mark » Mon Feb 05, 2018 5:26 pm

Anything?

hansgoudzwaard
Contributor
Posts: 786
Joined: Wed Oct 26, 2011 10:43 pm
SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.

Re: Gary

Post by hansgoudzwaard » Sat Feb 10, 2018 3:39 pm

I heard from Yona (on another site) that his mom passed away, and he was out of sight for a while.

I can not verify that.

Post Reply

Return to “The Bull Pen”