The Chopper Compendium

Thread looks good!
I will see if the dimension is online somewhere, otherwise I really do not want to take this apart again.
Somehow we will figure this out!

here are the spacer rods done.

12 inches between shoulders, 1.250 aluminum.
overall length of 12.230
drilled and tapped an inch deep on each end with 1/2" 13tpi

Hi Customize IT....the 5/16 bolt holes that are 7/7" long are fully threaded. The only thing ppl have to realize though is that the left side cavity I do not have the dimensions on as I simply used the dana 30 carrier to obtain them while I was turning the pc. I did not keep those dimensions. T...

lots of this stuff was just off the top of my head by looking at pics and then figuring out how to do it. Kinda like we all do with our bikes

Man that looks good....wish I had the time to learn cad skills! the 5/16 bolt holes for the sprocket and disc should be a max of 7/8" at the very deepest. That still gives you an eighth of an inch before you break through the wall into the cavity (which still won't be a deal breaker even if you...

Hahaha now you guys have everything I have on it....the rest is just eyeballing and winging it

more stuff

more

more

more

more

I know some of you have already seen these pics...but some have not so I will post them again.
These are all the pics I think I have ever taken of this. Maybe it will spark some ideas for other guys.

this is the carrier in mine JEEP DANA 30 BARE OPEN CARRIER CASE 3.73-UP

Here is probably the best view of the carrier that I used. 09 exploded view.jpg Not sure on the tire size/sprocket ratio as to the affect on the final speeds and power....learning curve for me too here is the drawing I made up for the plates to connect the whole rear assembly to the frame. Buddy of ...

and I verified yesterday that the sprocket lines up perfectly for a left side drive tranny with no offset sprockets or spacers needed. Manufacturer uses a Hawg Halter 4 piston caliper (around 400.00 new polished), I am going to use a right front caliper from a 2005 suzuki gsxr that is 4 piston (ebay...