I bought the full set of Ron Covell videos a few years ago, in VCR format.
I've watched several, and today had some time to watch the 2nd of the series.
This is "Basic Techniques for Working With Steel" copyright by Ron Covell 1994.
The video covers several areas of working steel. Topics are filling holes, smoothing lumpy metal, making/fitting patch panels.
Ron also recommends and demonstrates standard safety practices.
The project is a 1932 Morgan 3 wheeler, and he has the body set up on a rolling support for mobility.
He is very clear that there are other methods to achieve the same results, but his goal is to show the best practices.
Use of tools is demonstrated, including some home made tools.
Recommendations for sheet materials, electrodes, welding process, types of tools to use for different phases
Subjects demonstrated include:
stripping and cleaning metal of rust and previous filler material
Using step drill to open all holes to same dimension, making several patch plugs to equal dimension, inserting and welding patch plugs.
hammer and dolly techniques, including on-dolly and off-dolly.
use of a hand powered shrinker
heat shrinking a small area with a small torch. NOTE; in the video, Ron uses a wet rag to cool a heated area. The video includes a few text notes added explaining he learned after recording this is not a recommended technique as it causes hardening of the metal.
mallet and sand bag
blast cabinet
making body replacement patch panels, including chipboard paper and plywood templates, scribing, making a wire edge and rolling body panel over it.
This video has a lot of information in it, especially for a beginner.
Recommended highly.
Ron makes an obvious effort to leave room for good camera shots of the work in progress, and takes short breaks to explain the process clearly.
All in all, an excellent learning aid provided by a master of the craft
I rate this at 4 1/2 stars of 5, only because sometimes the camera does not have a good clear view of the material.
Later videos are better at showing the surface condition of the metal during stages of progress.
Ron Covell Vids
- railroad bob
- Contributor
- Posts: 939
- Joined: Fri Nov 04, 2011 10:07 pm
- SELF INTRODUCTION: Hi Dan, thanks for your time and energy spent on this new board. I hope you will give me a waiver on the email account, I have used gmail so long I don't have a clue what my service provider account is.
I just returned home from a 2 week trip in New Mexico, have a few good pix, can't wait to share my off-highway traveling. Got to put 1400 miles on the scoot.
Best, Bob Davidson - Location: Alaska
Ron Covell Vids
Alaska - Land of the Individual and Other Endangered Species
An Armed Society is a Polite Society,...
Politicians Prefer Unarmed Peasants
TANSTAAFL
An Armed Society is a Polite Society,...
Politicians Prefer Unarmed Peasants
TANSTAAFL
- BlueCollarMoto
- NewB
- Posts: 22
- Joined: Sat Jan 28, 2012 6:17 pm
- SELF INTRODUCTION: I take a lot of pix at parties of bikes and the people who ride them and post em up on my blog New Blue Collar Moto. I have a bunch of bike projects. 70 Ironhead, 79 Ironhead, 90 Sportster, 79 Triumph Bonneville, 78 RD400 Cafe Racer, 80 XT250 Cafe Racer, and a 74 CL360 Scrambler Cafe Racer. I have also been trying to get started with metal casting some of my own motorcycle parts in aluminum. One of these days...
- Location: Torrance, Ca
- Contact:
Re: Ron Covell Vids
Good Stuff! I picked up a bunch of them back in 06 or 07. Worth the coin for anyone starting out with out a doubt!
The new dot com blog! http://bluecollarmoto.com/blog/
The old blog>>> http://newbluecollarmoto.blogspot.com/
Simplicity is the ultimate sophistication.
The old blog>>> http://newbluecollarmoto.blogspot.com/
Simplicity is the ultimate sophistication.
- yona
- Conventioneer
- Posts: 278
- Joined: Tue Oct 25, 2011 4:55 pm
- SELF INTRODUCTION: Automotive weldor and fabricator for 45 years, like to dip in to both pools............make hand-tooled leather covered seats and bags.................jack of all trades........................63 years old......live in Baja Georgia, on the coast...former military
- Location: Baja Georgia - St Johns River Inlet
- Contact:
Re: Ron Covell Vids
I took all his classes, when they were a $130 a day each..... I would love to find a used set of his sruff to review....
I.D.G.A.F.H.T.D.I.A.O.C.C.
- BlueCollarMoto
- NewB
- Posts: 22
- Joined: Sat Jan 28, 2012 6:17 pm
- SELF INTRODUCTION: I take a lot of pix at parties of bikes and the people who ride them and post em up on my blog New Blue Collar Moto. I have a bunch of bike projects. 70 Ironhead, 79 Ironhead, 90 Sportster, 79 Triumph Bonneville, 78 RD400 Cafe Racer, 80 XT250 Cafe Racer, and a 74 CL360 Scrambler Cafe Racer. I have also been trying to get started with metal casting some of my own motorcycle parts in aluminum. One of these days...
- Location: Torrance, Ca
- Contact:
Re: Ron Covell Vids
I lost the link to his site a few computers ago but here are his videos.yona wrote:I took all his classes, when they were a $130 a day each..... I would love to find a used set of his sruff to review....
http://www.amazon.com/s/?ie=UTF8&keywor ... uclsy4qx_e
The new dot com blog! http://bluecollarmoto.com/blog/
The old blog>>> http://newbluecollarmoto.blogspot.com/
Simplicity is the ultimate sophistication.
The old blog>>> http://newbluecollarmoto.blogspot.com/
Simplicity is the ultimate sophistication.
- railroad bob
- Contributor
- Posts: 939
- Joined: Fri Nov 04, 2011 10:07 pm
- SELF INTRODUCTION: Hi Dan, thanks for your time and energy spent on this new board. I hope you will give me a waiver on the email account, I have used gmail so long I don't have a clue what my service provider account is.
I just returned home from a 2 week trip in New Mexico, have a few good pix, can't wait to share my off-highway traveling. Got to put 1400 miles on the scoot.
Best, Bob Davidson - Location: Alaska
Re: Ron Covell Vids
Envious of ya, wish I could do something like that. Maybe someday.yona wrote:I took all his classes, when they were a $130 a day each..... I would love to find a used set of his sruff to review....
Alaska - Land of the Individual and Other Endangered Species
An Armed Society is a Polite Society,...
Politicians Prefer Unarmed Peasants
TANSTAAFL
An Armed Society is a Polite Society,...
Politicians Prefer Unarmed Peasants
TANSTAAFL
- yona
- Conventioneer
- Posts: 278
- Joined: Tue Oct 25, 2011 4:55 pm
- SELF INTRODUCTION: Automotive weldor and fabricator for 45 years, like to dip in to both pools............make hand-tooled leather covered seats and bags.................jack of all trades........................63 years old......live in Baja Georgia, on the coast...former military
- Location: Baja Georgia - St Johns River Inlet
- Contact:
Re: Ron Covell Vids
have his link and personal email, but don't have the loot .....; )))
I.D.G.A.F.H.T.D.I.A.O.C.C.
- railroad bob
- Contributor
- Posts: 939
- Joined: Fri Nov 04, 2011 10:07 pm
- SELF INTRODUCTION: Hi Dan, thanks for your time and energy spent on this new board. I hope you will give me a waiver on the email account, I have used gmail so long I don't have a clue what my service provider account is.
I just returned home from a 2 week trip in New Mexico, have a few good pix, can't wait to share my off-highway traveling. Got to put 1400 miles on the scoot.
Best, Bob Davidson - Location: Alaska
Re: Ron Covell Vids
TAM.....
Time And Money, I have one or the other, but never both at once.
Time And Money, I have one or the other, but never both at once.
Alaska - Land of the Individual and Other Endangered Species
An Armed Society is a Polite Society,...
Politicians Prefer Unarmed Peasants
TANSTAAFL
An Armed Society is a Polite Society,...
Politicians Prefer Unarmed Peasants
TANSTAAFL