Which Bender to build
-
- NewB
- Posts: 3
- Joined: Thu Jan 30, 2014 11:07 am
- SELF INTRODUCTION: Industrial Designer/Tinkerer, I enjoy building Beer brewing racks, lighting, seating, handrail systems, rebuilding antique ride lawn mowers, basically anything involving metal, wood or concrete. I have several years of experience with 3D modeling and sheet metal l layout gained while working at a metal fabrication firm in Northern California.
Which Bender to build
I'm trying to decide which of the two tube benders posted on the main page that I should build. The original JD2 model or the CBH model. Is there an appreciable capability difference between the two? I noticed that the JD2 unit drawing specifies that it is set up for 4.5" CLR dies, but can it use other radius dies?
-
- Contributor
- Posts: 804
- Joined: Wed Oct 26, 2011 10:43 pm
- SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.
Re: Which Bender to build
http://www.choppercompendium.com/ccforu ... ender+dies
There is more at TOOLS AND EQUIPMENT" , all pretty much to help you decide.
Check out the one MAZ built.
There is more at TOOLS AND EQUIPMENT" , all pretty much to help you decide.
Check out the one MAZ built.
-
- Builder
- Posts: 368
- Joined: Wed Oct 26, 2011 4:49 am
- SELF INTRODUCTION: I am an expat tennessee hillbilly and retired us navy engineer livin' in Scotland and I have a love of old cars , trucks, motorcycles and most any other machinery !
I dont know if I can think of enough to say to reach the two hundred charactor minimun set by the mods , but I will persevere - Location: Greenock Scotland
Re: Which Bender to build
Yeah , and her "bend it on the diamond " square tubing die !
-
- NewB
- Posts: 3
- Joined: Thu Jan 30, 2014 11:07 am
- SELF INTRODUCTION: Industrial Designer/Tinkerer, I enjoy building Beer brewing racks, lighting, seating, handrail systems, rebuilding antique ride lawn mowers, basically anything involving metal, wood or concrete. I have several years of experience with 3D modeling and sheet metal l layout gained while working at a metal fabrication firm in Northern California.
Re: Which Bender to build
Thanks I will read all that.
-
- NewB
- Posts: 3
- Joined: Thu Jan 30, 2014 11:07 am
- SELF INTRODUCTION: Industrial Designer/Tinkerer, I enjoy building Beer brewing racks, lighting, seating, handrail systems, rebuilding antique ride lawn mowers, basically anything involving metal, wood or concrete. I have several years of experience with 3D modeling and sheet metal l layout gained while working at a metal fabrication firm in Northern California.
Re: Which Bender to build
ok that hydraulic "monster" looks like the ticket. Are there plans available for that machine?
-
- Contributor
- Posts: 804
- Joined: Wed Oct 26, 2011 10:43 pm
- SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.
-
- Contributor
- Posts: 804
- Joined: Wed Oct 26, 2011 10:43 pm
- SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.
Re:MechWerks
http://www.mechwerks.com/Mechwerks_plans_drawings.htm
Scroll to the bottom of the page.
This gent (Steve) has been around a long time.
Scroll to the bottom of the page.
This gent (Steve) has been around a long time.
-
- Lurker
- Posts: 57
- Joined: Fri Dec 20, 2013 12:57 am
- SELF INTRODUCTION: I was on the old forum, I have more tools and more projects now, I have a wide range of projects , home built boats, a few buggies, snowmachines and a few snowhawks, latly I have been collecting old broken machines most recently a marvel roll in bandsaw, and a old lathe that needs some love from 1908, and about 10 bike projects, most were not running when i got them , same with my mill and bandsaw I had to get them operable. Looking to further my knowledge and share what i can offer..
Re: Which Bender to build
Thats the style I built, a bit different but same style, i dont have a decent pic so i wasent going to comment, I like it as the tube stays level and I use a magnetic angle finder. The only thing is it only does a 90 or a bit more, mine has a big base and is portable yet very stable..I am kind of thinking of building another one of a different style just for fun and makeing my own die on the lathe..the first one I bought the dies from pro tools
-
- Lurker
- Posts: 57
- Joined: Fri Dec 20, 2013 12:57 am
- SELF INTRODUCTION: I was on the old forum, I have more tools and more projects now, I have a wide range of projects , home built boats, a few buggies, snowmachines and a few snowhawks, latly I have been collecting old broken machines most recently a marvel roll in bandsaw, and a old lathe that needs some love from 1908, and about 10 bike projects, most were not running when i got them , same with my mill and bandsaw I had to get them operable. Looking to further my knowledge and share what i can offer..
Re: Which Bender to build
This is where I developed my idea
http://www.blindchickenracing.com/tools ... bender.htm
http://www.blindchickenracing.com/tools ... bender.htm
-
- Contributor
- Posts: 804
- Joined: Wed Oct 26, 2011 10:43 pm
- SELF INTRODUCTION: I was on the last board as bonustoolkit. I have changed that to my given name.
I started a project build there " File and Fit." I paln to continue that when I go back home in Dec. 2011. I first joined the board when Gary W had it in the year 2005. That was the time I really gained an interest in building chops. I have a long way to go, compared to some here.
Re: Which Bender to build
I have a horizontal bender at present.
It works O.K.
I think this one looks interesting. Seems very compact, & I probably would not be bending past 90*
It works O.K.
I think this one looks interesting. Seems very compact, & I probably would not be bending past 90*
- Customize IT
- Contributor
- Posts: 992
- Joined: Thu Sep 19, 2013 7:54 am
- SELF INTRODUCTION: I am a young punk kid that needs some help building himself a chopper!!
I am sorry I only have a hotmail account???
Tell me what I need to do I need help with my girder!!!
PLESE HELP????
[url=http://imgur.com/8saXkqN][img]http://i.imgur.com/8saXkqNl.jpg[/img][/url]
[url=http://imgur.com/pXJZqQ0][img]http://i.imgur.com/pXJZqQ0l.jpg[/img][/url]
[url=http://imgur.com/T3Q4Ev4][img]http://i.imgur.com/T3Q4Ev4l.jpg[/img][/url]
[url=http://imgur.com/fsXGYQw][img]http://i.imgur.com/fsXGYQwl.jpg[/img][/url] - Location: Ohio, USA
Re: Which Bender to build
Can not beat my air operated hyd pump driven bender but i got it in a hell of a deal!
I got a manual I will never use JD2 no dies? where you at?
I got a manual I will never use JD2 no dies? where you at?